Tube Racks
Glass Expansion Quartz Scott Style Spray Chamber for Agilent 7850, 7900 and 8900 with UHMI
Quartz Scott Style Spray Chamber for Agilent 7850, 7900 and 8900 with UHMI Sourced from Glass Expansion
Glass Expansion Internal Standard UniFit Sample Line (PKT 3)
Internal Standard UniFit Sample Line (PKT 3) Sourced from Glass Expansion
Glass Expansion DC Fitting Type 52 with Ratchet Connector
DC Fitting Type 52 with Ratchet Connector Sourced from Glass Expansion
Abcam MTEP hydrochloride, mGlu5 antagonist, 10MG
MW 236.72 Da, Purity >99%. Brain penetrant, potent, selective and non-competitive mGlu5 receptor antagonist (IC50 = 5 nM in Ca2+-flux assay; Ki = 16 nM). In vivo anxiolytic, devoid of side effects seen with MPEP and benzodiazepines. Soluble in 1 ml water to give specified mM/ml concentration.
The product is subject to the following: Abcam Restricted Use Statement
Analytical Sales & Services 9mm, 12 x 32, 1.7mL PP Wide Mouth Twist Vials
Advantage™ 9mm, 12 x 32, 1.7mL Polypropylene Wide Mouth Twist Vials - for Robotic Arm Autosamplers: Agilent, Waters, Leap, Perkin Elmer and Shimadzu Good for Ion Chromatography
Bellco Glass, Inc. Stainless Steel Tube Rack,20-22mm-40P 4x10 Spacing
Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. MADE IN THE USA. Each opening rack 15/16" (23.8mm) Tube size: 20-22mm Spacing:4x10holds 40 tubes Dimensions: 9 11/16" X 3 15/16" X 3 1/8" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each
Analytical Sales & Services HotSleeve+ Column Heater - 3.5" x 12"
HotSleeve+ Self-calibrating Heater for HPLC Columns\n\nThe HotSleeve+ replaces the original Hot Sleeve column heater. Use with either the MultiSLEEVE™ controller or MonoSLEEVE™ controller, sold separately.\n\n• Inner diameter: 3.5"\n• Length: 12"\n• Temperature range: 5ºC Above Ambient to 85ºC
Analytical Sales & Services PEEKsil™ Tubing - 1/32" OD x 100µm ID, 100mm Length
PEEKsil™ Tubing - 1/32" OD x 100µm ID, 100mm Length. Color: Red
• Fused silica tubing covered in PEEK tubing
• Do not cut this tubing
• Use metal or PEEK fittings
• Great alternative to PEEK tubing
Pressure Rating
50 micron (0.002") ≤ 25,000 psi
100 micron (0.004") ≤ 15,000 psi
175 micron (0.007") ≤ 8,500 psi
200 micron (0.008") ≤ 6,000 psi
Analytical Sales & Services LumidoxII 48-Position LED Arrays for TCR - 505-Cyan
LumidoxII 48 Well, 505-CYAN LED Array for TCR, with Lens Mat and Solid Base (requires Thermal Transfer Deck and external chiller)
Glass Expansion Quartz Injector 1.8mm for Fully Demountable
Quartz Injector 1.8mm for Fully Demountable Sourced from Glass Expansion
Glass Expansion Quartz Torch with 3.0mm Injector, Sheath Gas & Fittings for Spectro EOP, SOP
Quartz Torch with 3.0mm Injector, Sheath Gas & Fittings for Spectro EOP, SOP Sourced from Glass Expansion
Analytical Sales & Services PEEK Tubing - 1/16" OD x .0025" ID x 100' Length
PEEK Tubing - 1/16" OD x .0025" ID x 100' Length\n\n\n\nColor: Natural\n\n\n\nPressure Rating: 7,000psi (483 bar)